Honeywell Thermostat 08161 User Manual - Honeywell Thermostat Manual Download

Latest

Sunday, April 5, 2020

Honeywell Thermostat 08161 User Manual

400-110-007-B_69-2023-01 (TH110-DP-P Cadet TL8230) ENG.fm Page 1 Friday, February 5, 2010 2:10 PM 08161 TH110-DP-P TL8230 1. 3. n Description p Configuration This programmable thermostat can be connected to an electric heating sys- The configuration switches are on the back of the thermostat. Default (factory) tem such as an electric baseboard, a radiant ceiling, a floor heating system, settings are inside the gray cells. an electric convector, etc. It is not compatible with a central heating system. # Configurations UP DN SW1 Not used SW2 Early Start a Disable Enable Time and day SW3 Time format 12-hour 24-hour Appears during the b On/Off setpoint display SW4 Temperature format °F °C switch Temperature a. Early Start can be used in Automatic mode only. When this function is Operating enabled, the thermostat calculates the optimal time to start heating in mode icons Preset temperature order to obtain the desired temperature by the set time. The thermostat icons re-assesses the start time daily based on the previous day’s perfor- Heating mance. indicator To set the day b. If you change the temperature display format, the preset temperatures ( , and ) will return to their default settings. Periods To set the time To program the schedule 4. Temperature Power-up preset buttons To skip a period q To select the Upon power-up, the thermostat is in manual mode ( ) and displays the room Temperature operating mode adjustment temperature. n Press the Hour and Min buttons to set the thermostat’s clock. o Press the Day button to set the day. 5. * Set the switch to Off to cut power to the heater. This will not affect the time and tem- Temperature Setting perature settings. r 2. Setpoint o Connection The thermostat normally displays the room temperature. To view the set tem- TURN OFF POWER TO THE HEATING SYSTEM AT THE MAIN POWER perature, press the or button briefly. The set temperature will appear for PANEL TO AVOID ELECTRICAL SHOCK. 5 seconds. • The installation must be carried out by an electrician. To change the setpoint, press the or button until the desired temperature • All cables and connections must conform to the local electrical code. is displayed. To scroll faster, hold the button. • Special CO/ALR solderless connectors must be used when connecting Using a preset temperature with aluminum conductors. The thermostat has 3 preset temperatures: • Install the thermostat onto an electrical box. Comfort temperature • Install the thermostat about 5 feet high, on an inside wall facing the Economy temperature heater. Vacation temperature • Avoid locations where there are air drafts (such as the top of a staircase or an air outlet), dead air spots (such as behind a door), or direct sun- Icon Intended use Default setting light. Comfort (when at home) 70 °F (21 °C) • Do not install the thermostat on a wall that conceals chimney or stove pipes. Economy (when asleep or away from home) 62 °F (16 °C) n Connect the thermostat wires to the Black Vacation (during prolonged absence) 50 °F (10 °C) power and to the load using solderless Power Load connectors for copper wires. • To use the Comfort or Economy temperature, press the or button Red o Push the excess wire back into the respectively. The corresponding icon will be displayed. electrical box to prevent interference • To use the Vacation temperature, press both and buttons simulta- with the thermostat. neously. The icon will be displayed. p Secure the thermostat using two 6-32 Storing a preset temperature screws. To store the Comfort or Economy temperature: q Return power to heating system. Set the desired temperature using the or button. Press and hold the appropriate button ( or ) for approximately 3 seconds until the NOTE: Always keep the thermostat's vents corresponding icon is displayed. clean and unobstructed. To store the Vacation temperature: Set the desired temperature using the or button. Press and hold Load both and buttons simultaneously for approximately 3 seconds until the icon is displayed. 08161 / TH110-DP-P / TL8230 69-2023-01 2010-02-05 1/2 Programmable Thermostat - Installation and User Guide 400-110-007-B_69-2023-01 (TH110-DP-P Cadet TL8230) ENG.fm Page 2 Friday, February 5, 2010 2:10 PM 6. 8. s Operating Modes u Troubleshooting Automatic - The temperature is set according to the energy-saving schedule. To place the thermostat in this mode, press Mode until is dis- Problems Solutions played. The icons of the current period and preset temperature are also dis- The thermostat’s screen is blank. The thermostat’s switch is set to Off. played. The measured temperature is below the LO is displayed. display range. Heating is activated. Temporary Bypass: If you modify the setpoint (by pressing the , , The measured temperature is above the HI is displayed. or button) when the thermostat is in automatic mode, the new set- display range. point will be used until the end of the current period. When the next The thermostat was without power for The wrong time is displayed. period starts, the temperature set for that period becomes the new set- more than 2 hours. point. The thermostat is located in a spot The measured temperature is wrong. Manual - The energy-saving schedule is not used. The temperature must exposed to an air draft. be set manually. To place the thermostat in this mode: The heater is always On. Check the thermostat wiring. The thermostat indicates that heating is On n Press Mode until is displayed. Check the thermostat wiring. o Set the temperature using the , , or button. but the heater is not On. Check that the thermostat is in Automatic The temperature does not change accord- Vacation - The thermostat is set to the Vacation temperature. Press both mode. Check also the schedule and clock ing to the energy-saving schedule and buttons simultaneously to place the thermostat in Vacation mode. settings. 7. 9. t Energy-saving Schedule Technical Specifications The schedule consists of 4 periods per day which represents a typical week v Power: 208/240 Vac, 60 Hz day. You can program the thermostat to skip the periods that do not apply to Maximum load: 16 A maximum (resistive only) your situation. For example, you can skip periods 2 and 3 for the weekend. 3328 watts @ 208 Vac 3840 watts @ 240 Vac Display range: 32 °F to 140 °F (0 °C to 60 °C) Period Description Associated preset temperature Display resolution: 0.1 °F (0.1 °C) Setpoint range: 40 °F to 86 °F (5 °C to 30 °C) Wake-up Setpoint interval: 1 °F (1 °C) Storage: -4 °F to 120 °F (-20 °C to 50 °C) Away from home Data backup: In the event of a power outage, most settings are saved. Only the time must be re-adjusted if the power outage lasts more than 2 hours. The thermo- stat will return to the mode that was active prior to the power outage. Return home 10. Warranty Sleep ; Honeywell warrants this product, excluding battery, to be free from defects in the work- The Comfort ( ) temperature is used in periods 1 and 3 and the Economy manship or materials, under normal use and service, for a period of one (1) year from the date of purchase by the consumer. If at any time during the warranty period the product is ( ) temperature is used in periods 2 and 4. For example, when the period determined to be defective or malfunctions, Honeywell shall repair or replace it (at Hon- changes from 1 to 2, the setpoint automatically changes from Comfort setting eywell's option). ( ) to Economy setting ( ). If the product is defective, (i) return it, with a bill of sale or other dated proof of purchase, to the place from which You can have a different program for each day of the week; i.e., each period you purchased it, or can start at different time for each day of the week. The thermostat has been (ii) call Honeywell Customer Care at 1-800-468-1502. Customer Care will make the programmed with the following schedule. determination whether the product should be returned to the following address: Honeywell Return Goods, Dock 4 MN10-3860, 1885 Douglas Dr N, Golden Valley, MN 55422, or whether a replacement product can be sent to you. This warranty does not cover removal or reinstallation costs. This warranty shall not Period Setting MO TU WE TH FR SA SU apply if it is shown by Honeywell that the defect or malfunction was caused by damage which occurred while the product was in the possession of a consumer. 6:00 6:00 6:00 6:00 6:00 6:00 6:00 Honeywell's sole responsibility shall be to repair or replace the product within the terms AM AM AM AM AM AM AM stated above. HONEYWELL SHALL NOT BE LIABLE FOR ANY LOSS OR DAMAGE OF ANY KIND, INCLUDING ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING, DIRECTLY OR INDIRECTLY, FROM ANY BREACH OF ANY WARRANTY, 8:00 8:00 8:00 8:00 8:00 --:-- --:-- EXPRESS OR IMPLIED, OR ANY OTHER FAILURE OF THIS PRODUCT. Some states AM AM AM AM AM do not allow the exclusion or limitation of incidental or consequential damages, so this limitation may not apply to you. 6:00 6:00 6:00 6:00 6:00 THIS WARRANTY IS THE ONLY EXPRESS WARRANTY HONEYWELL MAKES ON --:-- --:-- PM PM PM PM PM THIS PRODUCT. THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PUR- POSE, IS HEREBY LIMITED TO THE ONE-YEAR DURATION OF THIS WARRANTY. 10:00 10:00 10:00 10:00 10:00 10:00 10:00 Some states do not allow limitations on how long an implied warranty lasts, so the above PM PM PM PM PM PM PM limitation may not apply to you. This warranty gives you specific legal rights, and you may have other rights which vary To modify the schedule: from state to state. If you have any questions concerning this warranty, please write Honeywell Customer n Press Pgm to access the programming mode. Period 1 is selected. Relations, 1985 Douglas Dr, Golden Valley, MN 55422 or call 1-800-468-1502. In Can- ada, write Retail Products ON15-02H, Honeywell Limited/Honeywell Limitée, 35 Dynamic o Press Day to select the day to program (hold for 3 seconds to select the Drive, Scarborough, Ontario M1V4Z9. entire week). 11. p Press Hour and Min to set the start time of the selected period, or press Customer Assistance Clear if you want to skip the period (--:-- is displayed). If you have any questions about the operation of your thermostat, please go to q Press Pgm to select another period, or press Day to select another day. http://yourhome.honeywell.com, or call Honeywell Customer Care toll-free Then repeat step 3. at 1-800-468-1502. r Press Mode to exit the programming mode. NOTE: If no button is pressed for 60 seconds, the thermostat will automati- R cally exit the programming mode. 08161 / TH110-DP-P / TL8230 69-2023-01 2010-02-05 2/2 Programmable Thermostat - Installation and User Guide

No comments:

Post a Comment

Popular Posts