Honeywell Thermostat CT3500CT3595 OWNER’S Manual - Honeywell Thermostat Manual Download

Latest

Sunday, April 5, 2020

Honeywell Thermostat CT3500CT3595 OWNER’S Manual

Honeywell CT3500/CT3595 PROGRAMMABLE THERMOSTAT OWNER’S GUIDE Weekday, Saturday and Sunday Programmable Heat and/or Cool Low Voltage (20 to 30 Vac) Thermostat and Wallplate Model CT3500/CT3595 Para pedir estas instrucciones en español, llame al 1-800-468-1502. Pour obtenir ce ode demploi en français, composer le 1-800-468-1502. Table of Contents Step 1. Prepare for Installation .................................................................................................................................. 5 Step 2. Remove Old Thermostat ............................................................................................................................... 6 Step 3. Mount Thermostat Wallplate ......................................................................................................................... 7 Step 4. Wire Wallplate Terminals ............................................................................................................................... 8 Step 5. Install the Batteries ....................................................................................................................................... 9 Step 6. Set Fan Operation Switch ............................................................................................................................. 10 Step 7. Mount the Thermostat ................................................................................................................................... 11 Step 8. Customize Your Thermostat .......................................................................................................................... 11 Step 9. Set the Clock ................................................................................................................................................. 13 Step 10. Programming .............................................................................................................................................. 14 Step 11. Operating Your Thermostat ......................................................................................................................... 17 Step 12. Set the Fan and System Switches .............................................................................................................. 18 If You Have a Problem ............................................................................................................................................... 19 Smart Response™ Technology ................................................................................................................................. 21 Wiring Diagrams ........................................................................................................................................................ 22 ® U.S. Registered Trademark Copyright © 2001 Honeywell • •All Rights Reserved 69- 1199- 2 Total comfort temperature management with Smart Response™ Technology. Congratulations! You made a smart choice by purchasing your new Honeywell thermostat the smart thermostat that; • Keeps you comfortable by automatically calculating exactly when the furnace or air conditioning should go on to have the house at the desired comfort temperature by the time you wake up or return home. • Saves the maximum amount of energy and money by automatically remembering to adjust the temperature when you leave home or go to sleep. • Provides the ultimate in comfort and convenience. It comes preprogrammed. You can use the preprogrammed schedule, or set your own. This manual answers many of the questions that can arise as you become familiar and comfortable with your Honeywell thermostat — the state of the art in home comfort controls. Read these instructions carefully. Failure to follow these instructions can damage the product or cause a hazardous condition. MERCURY NOTICE If this thermostat is replacing a control that contains mercury in a sealed tube, do not place your old control in the trash. Contact your local waste management authority for instructions regarding recycling and the proper MERCURY SWITCH disposal of this control, or of an old control containing mercury in a sealed tube. If you have questions, call Honeywell Inc. at 1-800-468-1502. TYPICAL LOCATION OF A MERCURY SWITCH IN A THERMOSTAT M10614 69-1199—22 DIGITAL DISPLAY RAISES TEMPERATURE SETTING SET CURRENT LOWERS TEMPERATURE DAY/TIME SETTING SETS CURRENT TIME AND DAY DISPLAYS CURRENT HEAT/COOL TEMPERATURE SETTING RUN PROGRAM RETURNS THERMOSTAT Time Set Program PROGRAM PERIODS TO NORMAL Run Set Current Wake Leave Return Sleep WAKE/LEAVE/RETURN/SLEEP: OPERATING MODE Program Day/Time ENTERS PROGRAMMING MODE Heat Off Cool Heat/Cool Hold Temp Day HOLD TEMP Settings System SETS A HOLD On Auto SYSTEM SWITCH TEMPERATURE Fan SELECTS HEAT/OFF/COOL AND ACTIVATES VACATION HOLD FAN SWITCH FEATURE. SELECTS AUTO/ON DAY SETS DAY OF HEAT/COOL SETTING SWITCHES BETWEEN THE WEEK HEAT SETPOINTS AND COOL SETPOINTS TIME /TIME WHILE PROGRAMMING SETS TIME FORWARD OR BACK M18589 3 69-1199—2 DISPLAYS EITHER CURRENT TIME OF DAY OR PROGRAM TIMES SHOWS THERMOSTAT IS IN THE SET DAY/TIME MODE SHOWS WHEN THERMOSTAT IS IN THE PROGRAMMING MODE SHOWS TEMPERATURE SETTING CHANGED FOR THIS PROGRAM PERIOD SHOWS VACATION HOLD DURATION SHOWS THE TEMPERATURE DISPLAYED IS THE CURRENT Set Program Set Day/TimeTemporary Setting SET TEMPERATURE SHOWS CURRENT Hold for AM DAY OR DAYS BEING Em Ht Room SHOWS THE TEMPERATURE PROGRAMMED Aux Ht Humid DISPLAYED IS THE CURRENT MonTueWedThuFriSatSun Days Outdoor ROOM TEMPERATURE SHOWS CURRENT WakeLeaveReturnSleep In Recovery Filter Repl Batt PROGRAM PERIOD System SHOWS THE BATTERIES ARE OR PERIOD BEING Em Heat Off Cool Auto Wait LOW AND MUST BE PROGRAMMED REPLACED SHOWS CURRENT DISPLAYES EITHER ROOM SYSTEM SWITCH POSITION OR SET TEMPERATURES HEAT/OFF/COOL SHOWS THAT THERMOSTAT IS SHOWS SMART RESPONSE IS OFF "CALLING" FOR HEAT OR COOL CONVENTIONAL RECOVERY IS ON SHOWS THERMOSTAT IS PROCESSING SHOWS SMART RESPONSE IS INFORMATION AND WAITING TO CALL FOR HEAT OR COOL CHANGING THE TEMPERATURE TO MEET THE CURRENT PROGRAMS M18590 69-1199—24 STEP 1. PREPARE FOR INSTALLATION ❑ Check Table 1, the compatibility chart, to make sure the thermostat is compatible with your system. If your system is not compatible, call Honeywell Customer Relations Center, toll-free, 1-800-468-1502. Table 1. Compatibility Chart. System Type Compatibility with CT3500/CT3595 Gas — Standing Pilot Yes Gas — Electronic Ignition Yes Gas-fired Boilers Yes a Gas — 750 Millivolt Heat onlyb Yes Oil-Fired Boilers Yes a Oil-Fired Furnace Yes Electric Furnace Yes Electric Air Conditioning Yes Baseboard Electric (120/240 line volt)c No Single Stage Heat Pump Yes Multistage Heat Pumps/Multistage Equipment No a Compatible with 2-wire Honeywell and Taco zone valves. Not compatible with 3-wire zone valves or 2-wire White Rodgers no. 1361 zone valves. b Millivolt system must be heating only. c Not compatible with any 120/240 volt system. Package Contents • Thermostat • Wallplate • Screws and anchors • Wiring labels • 3 Energizer® AA batteries • Owners manual Tools Required • Screwdriver • Drill 5 69-1199—2 STEP 2. REMOVE OLD THERMOSTAT ❑ Test your heating and cooling systems to make sure they work properly. If either system does not work, contact your local heating/air-conditioning dealer. To avoid compressor damage, do not operate the cooling system when outdoor temperature is below 50°F (10°C). ❑ Turn off power to the system at the furnace or the fuse/circuit breaker panel. ❑ Carefully unpack your new thermostat and wallplate. Save package of screws, instructions, and receipt. ❑ Remove the cover from the old thermostat. If the cover does not snap off when pulled firmly from the bottom, check for a screw or screws used to lock on the cover. ❑ Loosen the screw or screws holding the thermostat to the wallplate and lift the thermostat away. ❑ Disconnect the wires from the old thermostat. As you disconnect each wire, attach the enclosed labels with the old terminal designation. If there are only two wires, they do not need to be labeled. Wrap the wires around a pencil as shown to keep them from falling back into the wall. Special Installations WIRES THROUGH Read this section if you are replacing: WALL OPENING • Clock thermostat with separate wires for the clock. • Thermostat with six or more wires connected to it. • Thermostat in a heating only system with three wires. Replacing a Clock Thermostat that has C or C1 Clock Terminals M5136 If you are replacing a Honeywell Chronotherm® Thermostat, you may find one or two wires going to the C or C1 clock terminals on the Chronotherm wiring wallplate. Do not allow them to touch, or you can damage the transformer. Disconnect the wires and wrap them separately using electrical tape. Do not wrap them together. Place the wires where they will not interfere with the operation of the new thermostat. Record the colors and terminal designation labels of the remaining wires. Replacing a Thermostat that has Six or More Wires If there are six or more wires (excluding clock wires attached to terminals), you probably have a variation of a multistage heat pump or other multistage system. This thermostat is not compatible with multistage systems, so return the product to the place of purchase. For information about which programmable thermostats will work with your system, call Honeywell Customer Relations Center, at 1-800-468-1502. 69-1199—26 Replacing a Thermostat that has Three Wires If you have three wires for a heating only system and can operate the fan using the fan ON switch this thermostat works with your system. However, some hot water (zoned) heating systems also have three wires. Your thermostat will work only if you install an isolating relay on these systems. For details, call your local heating and/or cooling contractor. STEP 3. MOUNT THERMOSTAT WALLPLATE ❑ Separate the wallplate from the thermostat by placing your thumb or fingers between the bottom of the wallplate and the thermostat, and pulling the wallplate up and away from the thermostat. See illustration at right. ❑ Position the wallplate on the wall. Level the wallplate for appearance if desired. Use a pencil to mark the two mounting holes that best fit the application. M16427 ❑ Remove the wallplate from the wall. Drill two 3/16 in. holes in wall (if drywall) as shown. For materials such as plaster or wood, drill WALL 7/32 in. holes where marked. Gently, tap the (provided) anchors WIRES into the drilled holes until they are flush with the wall. THROUGH WALL ❑ Reposition the wallplate over the holes. Pull the wires through the wiring opening. Loosely insert mounting screws into each of the holes WALL ❑ Level the wallplate if desired. Thermostat functions properly when ANCHORS (2) not level. ❑ Tighten mounting screws. MOUNTING HOLES MOUNTING SCREWS M15044 7 69-1199—2 STEP 4. WIRE WALLPLATE TERMINALS IMPORTANT All wiring must comply with local codes and ordinances. If unsure about household wiring procedures, call your local heating/air-conditioning contractor. Refer to the labels you placed on the wires when you removed the old thermostat (see illustration). ❑ Match the letter of your old thermostat wire with the corresponding terminal letter on your new thermostat. Refer to Table 2. ❑ Remove the factory-installed jumper connecting terminals R and RC if wires are connected to both of those terminals. R ❑ For wiring diagrams, if needed, see pp 21-22. W ❑ Loosen the terminal screws. Slip each wire beneath its matching terminal. Wraparound and straight connections are both Y G acceptable, (see illustration). Tighten the terminals. FOR WRAPAROUND FOR STRAIGHT INSERTION INSERTION STRIP STRIP 5/16 IN. (8 MM). 7/16 IN. (11 MM). M4826 ❑ Plug the hole in the wall with insulation to help prevent drafts from adversely affecting thermostat operation. M16425 69-1199—28 Table 2. Terminal Designations on Old and New Thermostats Terminal on Old Thermostat Connect To Description R, RHa, 4, V R Power Rc, Ra Rc Power for cooling W, W1, H W Heat Y, Y 1, M Y Cooling G, F G Fan O O Changeover in cool. (Single stage heat pump only). Bb Bb Changeover in heat. (Single stage heat pump only). Cc, Xc, Bb Do not connect. Transformer common W2, H2 Do not continue installation. Second stage heat. Call 1-800-468-1502. Y2 Second stage cool. a If both RH and R terminals are present on existing thermostat, remove jumper and connect Rh to R and R to Rc. b Do not connect both O and B when wiring to a single stage heat pump. Connect O to O. Tape off B. c Tape off end of the wire with electrical tape and push the taped wire back into the wiring hole in the wall. STEP 5. INSTALL THE BATTERIES WALLPLATE B IMPORTANT Three AA alkaline batteries are included with the thermo- stat. Batteries must be installed for programming and RRCOWYG operation of the thermostat and the heating/cooling sys- tem. ❑ Install the batteries in the wallplate so the positive terminals all point up (see illustration). INSTALL 3 AA ALKALINE BATTERIES AS SHOWN, POSITIVE (+) TERMINALS TOWARD TOP. M10622 9 69-1199—2 ❑ If the thermostat is already mounted on the wall, remove the thermostat by placing your thumb between the thermostat and wallplate and pulling the thermostat up and away as shown. When the batteries are running low, a REPL BAT message flashes for one to two months before the batteries run out completely. Replace the batteries as soon as possible once the message flashes. IMPORTANT Although the thermostat has a low battery indicator, replace the batteries once per year to prevent leakage and to prevent the thermostat and heating/cooling sys- tem from shutting down due to lack of battery power in the thermostat. If you insert new batteries within 20 to 30 seconds of removing the M16424 old batteries, the system retains the current time and day. If the display is blank, the batteries are dead or installed incorrectly. You must reset the time and day. Refer to Set the Clock for instructions. As a precaution when leaving home for longer than a month, change batteries before leaving to prevent 0 80 7 90 60 the system from shutting down due to lack of power. Always use fresh alkaline batteries. Nonalkaline 60 90 70 80 batteries do not last as long. They also can leak, causing damage to the thermostat and the wall surface. Honeywell recommends Energizer® batteries. STEP 6. SET FAN OPERATION SWITCH The thermostat fan operation switch, labeled FUEL SWITCH is factory set in the F position. This is the correct setting for most systems. If your system is an electric heat system, set the switch to E. The E setting allows the fan to turn on immediately with the heating or cooling in a system where the G terminal is connected. FUEL SWITCH M12676 69-1199—210 STEP 7. MOUNT THE THERMOSTAT A. ENGAGE TABS AT TOP B. PRESS LOWER OF THERMOSTAT EDGE OF CASE AND WALLPLATE. TO LATCH. M12703 STEP 8. CUSTOMIZE YOUR THERMOSTAT Your Honeywell thermostat comes preset to the most commonly used settings. The settings are: — Gas or oil forced air furnace. — Smart Response technology on. — Temperature °F. — 12-hour clock format. You can change any or all of these settings. IMPORTANT Always press the keys with your fingertip or a similar blunt tool. Sharp instruments like pens and pencil points can damage the keyboard. ❑ Press and hold down , , and , simultaneously until the screen shows. You now can change any of these settings. FEATURE OPTION NUMBER M13330 11 69-1199—2 System Type (Feature Number 4) System type options are: — 1 = Gravity or steam system. — 3 = Hot water, high efficiency furnace (90% or better), or single stage heat pump. — 6 = Gas or oil forced air furnace (preset). — 9 = Electric furnace. To change your system type: ❑ Press until display shows your furnace or boiler type. Run ❑ Press Time to move to next feature or Program to return to main display. Smart Response™ Technology (Feature Number 13) Smart Response technology options are: — 0 = Smart Response technology on (preset). — 1 = Smart Response technology off. M13343 To turn Smart Response technology on or off: ❑ Press once. Run ❑ Press Time to move to next feature or Program to return to main display. NOTE: See Smart Response technology (page 20) for information about this feature. Temperature Format (Feature Number 14) Temperature format options are: — 0 = °F (preset). — 1 = °C. M13344 To change temperature format: ❑ Press once. Run ❑ Press Time to move to next feature or Program to return to main display. 69-1199—212 Time Format (Feature Number 16) Time format options are: — 0 = 12-hour clock (preset). — 1 = 24-hour clock. M13345 To change time format: ❑ Press once. Run ❑ Press Program to return to main display. Factory Set Function (Feature Number 37) Do not change this setting. STEP 9. SET THE CLOCK M13346 Set Current Day and Time NOTE: On initial power-up, the screen flashes 1:00 pm until you press a key. Set Current ❑ Press Day/Time . ❑ Press Day until screen shows current day. Set Current ❑ Press time or until screen shows current time. (Tapping the Day/Time will advance the time in one hour increments). Run ❑ Press Program . 13 69-1199—2 STEP 10. PROGRAMMING The keyboard is located behind the thermostat cover. The three most frequently used keys are near the display. Pressing displays the current temperature settings. Pressing the and keys change the temperature. The thermostat displays day, time, program period, temperature and system settings. There is an individual key for each of the four program periods: Wake —The program period when you want the house at a comfortable temperature when you get up and while you get ready for work or school. (This is a higher temperature during the heating season and a lower temperature during the cooling season). Leave —The program period you can set for an energy-saving temperature while you are away at work or school. (This is a lower temperature during the heating season and a higher temperature during the cooling season). Return —The program period when you want the house at a comfortable temperature for activities before bedtime. (This is a higher temperature during the heating season and a lower temperature during the cooling season). Sleep —The program period you can set for an energy-saving temperature while you sleeping. (This is a lower temperature during the heating season and a higher temperature during the cooling season). Table 3 can be helpful when planning your schedule of time and temperature settings. The thermostat preprogrammed settings are shown in parentheses ( ). 69-1199—214 Table 3. Personal Programming Table. Period Default Setting Weekday (Mon-Fri) Saturday (Sat) Sunday (Sun) Wake Time (6:00AM) Heata (70°F/21°C) Coolb (78°F/25.5°C) Leave Time (8:00AM) Heata (62°F/16.5°C) Coolb (85°F/29.5°C) Return Time (6:00PM) Heata (70°F/21°C) Coolb (78°F/25.5°C) Sleep Time (10:00PM) Heata (62°F/16.5°C) Coolb (82°F/28°C) a Your heating setpoints cannot be higher than 90°F (32°C) or lower than 40°F (4.5°C). b Your cooling setpoints cannot be higher than 99°F (37°C) or lower than 45°F (7°C). Program Weekdays Start by programming the wake time and temperature for weekdays. ❑ Press and release Wake . ❑ Press Day until (Mon-Fri) displays. ❑ Press Time or key until the desired time shows in the display. NOTE: Program times are in 15 minute intervals. For example, 8:00, 8:15, 8:30. ❑ Press or key until the desired wake temperature displays. 15 69-1199—2 The setpoint temperature range is 40°F to 90°F (4.5°C to 32°C) for heating and 45°F to 99°F (7°C to 37°C) for cooling. Heat/Cool ❑ Press Settings to switch between heating and cooling setpoints. NOTE: Program times are the same for heating and cooling. ❑ Press or until the display shows the desired temperature setpoint. ❑ Press Leave , Return or Sleep and repeat these steps for each time period. Your weekday is now programmed. Program Saturday and Sunday Repeat each step in Program Weekdays for Saturday and Sunday. Run ❑ Press Program when the entire week is programmed. Clear a Program Period NOTE: Wake cannot be cleared. ❑ Press Leave , Return , or Sleep for the program period you want to clear. ❑ Press Day until the desired day displays (Mon-Fri Sat; Sun). ❑ Press and hold the Leave , Return , or Sleep for approximately 3 seconds until the time and temperature clear. ❑ Repeat the above steps for each period to be cleared. Run ❑ Press Program . 69-1199—216 STEP 11. OPERATING YOUR THERMOSTAT Change Temperature Setting Until the Next Program Period (Temporary Change) ❑ Press or until the screen shows the desired temperature setting. NOTE: The temporary temperature setting is displayed for about 3 seconds and then the room temperature is dis- played. Temporary appears in the display. The setting cancels when the next program period starts or when Run you press Program . Change Temperature Setting Indefinitely (Hold) ❑ Move the System switch to the desired position (Heat or Cool). ❑ Press Hold Temp then or to change your setting if desired. (The display changes from showing the setpoint temperature to room temperature after approximately three seconds). Run ❑ To cancel “Hold” press Program . Change the Temperature Setting Until a Designated Day and Period (Vacation Hold) ❑ Press Hold Temp twice. ❑ Press or until the display shows the desired temperature setpoint. ❑ Press Time until the desired number of days that you will be away (1 through 255) is displayed. ❑ Press Wake , Leave , Return or Sleep to select the program period when you want the program to restart. Run NOTE: If the Vacation Hold needs to be cancelled before the designated time, press Program to return to the pro- gram. 17 69-1199—2 STEP 12. SET THE FAN AND SYSTEM SWITCHES First set the fan switch. Fan On: The fan runs continuously. Use for improved air On Auto circulation or for more efficient central air cleaning. (In a heat-only system, fan runs continuously only if fan relay is Fan connected to the G thermostat terminal). Fan Auto: Normal setting for most homes. The equipment controls the fan operation. On Auto Fan Then set the system Heat: The thermostat controls your heating system. switch. Heat Off Cool System Off: Both the heating and air conditioning systems are off. Heat Off Cool System Cool: The thermostat controls your air conditioning system. Heat Off Cool System 69-1199—218 IF YOU HAVE A PROBLEM Table 4. Solution Guide. If... Then… Display does not appear. • Make sure the batteries are installed correctly. • Make sure the thermostat is mounted and latched on the wallplate. Mount and latch the thermostat on the wallplate if it is not. Temperature settings will not change • Make sure the temperature setpoints are: (example; cannot set the heating higher —40 to 90°F (4.5 to 32°C) for heating. or the cooling lower). —45 to 99°F (7 to 37°C) for cooling. Heating does not come on. • Make sure the heating setpoint is above the room temperature. • Make sure the circuit breaker is not tripped, and reset it if necessary. • Make sure the power switch at the equipment is in the On position, and set it to On if it is in the Off position. • Wait five minutes for the system to respond. • Set the system switch to Heat. 19 69-1199—2 Table 4. Solution Guide. If... Then… Cooling does not come on. • Make sure the cooling setpoint is below the room temperature. • Make sure the circuit breaker is not tripped, and reset it if necessary. • Make sure the system switch at the air conditioner is in the On position, and set it to On if it is in the Off position. • Wait five minutes for the system to respond. • Set the system switch to Cool. System on indicator ( = heat, = Wait five minutes after seeing the flame or snowflake and check the cool) is lit, but no warm or cool air is registers again. If no there is no hot or cool air coming from the registers, coming from the registers. refer to Heating does not come on or Cooling does not come on. If all of this has been checked, contact your local heating and cooling contractor. Display flashes during programming. Temperature setting limit has been reached. The heating setting range is 40 to 90°F (4.5 to 32°C). The cooling setting range is 45 to 99°F (7 to 37°C). Temperature changes occur at the • Check the program times for the period in question. wrong times. • Make sure the AM and PM settings are correct. • Make sure the current time and day settings are correct. • Reprogram any incorrect settings. NOTE: If your thermostat is set for Smart Response™ technology, the start times occur before your programmed comfort period. Toll-Free Customer Assistance Please read and follow the provided instructions for this thermostat. For additional information, go to www.honeywell.com/yourhome or call the Honeywell Customer Relations Center at 1-800-468-1502. The Center hours are Monday through Friday, 7:00AM to 5:30PM Central Time. Before calling, please have the following information available: • Thermostat model number. (Located on back of thermostat). • Thermostat date code. (Located below model number). • Type of heating/cooling system (for example, hot water, warm air, oil, or gas). • Location and number of wires connected to the thermostat. 69-1199—220 SMART RESPONSE™ TECHNOLOGY Your thermostat is actually a small computer. The Smart Response technology calculates the correct time of day to turn on your heating or cooling system. Smart Response technology considers the following information. • Air temperature. • Wall temperature. • The time of day when you want the comfort temperature established. When the thermostat activates Smart System Operating Response technology, the thermostat in Comfort Mode AM 68°F Room Mon displays In Recovery, changes the Wake System Recovery Heat setpoint, and turns on the system. Continues AM • Your thermostat learns from ° Room 66 F Mon Heat Sleep In Recovery System experience. Each day it checks how Recovery Heat Begins closely it hit the recovery target and 1 AM 64°F Room Mon Heat then adjusts the next days recovery Sleep In Recovery System TEMPERATURE System Operating in Heat start time accordingly. Energy Savings Mode AM • It takes a few days after installation for 62°F Room Mon Sleep System the thermostat to adjust to the local Heat weather, your lifestyle, the 5:005:30 6:00 6:30 ENERGY COMFORT construction of your home, and your RECOVERY FROM ENERGY SAVINGS SAVINGS PERIOD heating/cooling system. PERIOD TIME • You can turn off Smart Response THERMOSTAT USES THE SAME SCHEME TO RETURN TO LOWER COMFORT TEMPERATURE DURING THE COOLING SEASON. technology by selecting Conventional 1 IF In Recovery IS DISPLAYED, PRESS TO SEE THE COMFORT SETPOINT. M18591 Recovery. See Step 8. Customize Your Thermostat. 21 69-1199—2 WIRING DIAGRAMS 4-WIRE HEAT/COOL 2-WIRE HEAT-ONLY (JUMPER INTACT) (JUMPER INTACT) THERMOSTAT THERMOSTAT B B RC OW Y RC OW Y R G R G HEATING COOLING FAN HEATING RELAY OR CONTACTOR RELAY 1 RELAY OR VALVE COIL COIL VALVE COIL 1 1 POWER SUPPLY. PROVIDE DISCONNECT MEANS AND 1 POWER SUPPLY. OVERLOAD PROTECTION AS REQUIRED. PROVIDE DISCONNECT MEANS M10617 AND OVERLOAD PROTECTION AS REQUIRED. M10616 4-WIRE SINGLE-STAGE HEAT PUMP (JUMPER INTACT) 3-WIRE HEAT ONLY WITH FAN (JUMPER INTACT) THERMOSTAT THERMOSTAT B B RC OW Y RC OW Y R G R G 3 2 COMPRESSOR HEAT CHANGEOVER HEATING FAN CONTACTOR VALVE RELAY OR 1 2 VALVE COIL RELAY 1 COOL FAN CHANGEOVER 1 POWER SUPPLY. PROVIDE VALVE RELAY DISCONNECT MEANS AND OVERLOAD PROTECTION AS REQUIRED. M10618 1 POWER SUPPLY. PROVIDE DISCONNECT MEANS AND OVERLOAD PROTECTION AS REQUIRED. 2 USE EITHER O OR B FOR HEAT PUMP CHANGEOVER. 3 USING A JUMPER WIRE (NOT SUPPLIED) CONNECT W TO Y. M12739 69-1199—222 5-WIRE HEAT/COOL WITH DAMPER 5-WIRE HEAT/COOL (JUMPER INTACT) (JUMPER REMOVED) THERMOSTAT THERMOSTAT B B RC OW Y RC OW Y R G R G HEAT HEAT COMPRESSOR HEATING FAN COOLING DAMPER RELAY CONTACTOR RELAY OR RELAY CONTACTOR VALVE COIL COIL 1 1 COOL FAN DAMPER RELAY 1 1 1 POWER SUPPLY. PROVIDE POWER SUPPLY. PROVIDE DISCONNECT MEANS AND OVERLOAD DISCONNECT MEANS AND OVERLOAD PROTECTION PROTECTION AS REQUIRED. M10619 AS REQUIRED. M18738 Notice: This thermostat is a Class B digital apparatus that complies with Canadian Radio Interference Regulations, CRC c. 1374. 23 69-1199—2 Limited One-Year Warranty Honeywell warrants this product, excluding battery, to be free from defects in the workmanship or materials, under normal use and service, for a period of one (1) year from the date of purchase by the consumer. If, at any time during the warranty period, the product is defective or malfunctions, Honeywell shall repair or replace it (at Honeywells option) within a reasonable period of time. If the product is defective, (i) return it, with a bill of sale or other dated proof of purchase, to the retailer from which you purchased it, or (ii) package it carefully, along with proof of purchase (including date of purchase) and a short description of the malfunction, and mail it, postage prepaid, to the following address: Honeywell Inc. USA Honeywell Canada: Dock 4 — MN10-3860 Honeywell Limited/Honeywell Limitée 1885 Douglas Drive North 35 Dynamic Drive Golden Valley, MN 55422-3992 Scarborough, Ontario M1V 4Z9 This warranty does not cover removal or reinstallation costs. This warranty shall not apply if it is shown by Honeywell that the defect or malfunction was caused by damage which occurred while the product was in the possession of a consumer. Honeywells sole responsibility shall be to repair or replace the product within the terms stated above. HONEYWELL SHALL NOT BE LIABLE FOR ANY LOSS OR DAMAGE OF ANY KIND, INCLUDING ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING, DIRECTLY OR INDIRECTLY FROM ANY BREACH OF ANY WARRANTY, EXPRESS OR IMPLIED, OR ANY OTHER FAILURE OF THIS PRODUCT. Some states do not allow the exclusion or limitation of incidental or consequential damages, so this limitation may not apply to you. THIS WARRANTY IS THE ONLY EXPRESS WARRANTY HONEYWELL MAKES ON THIS PRODUCT. THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, IS HEREBY LIMITED TO THE ONE YEAR DURATION OF THIS WARRANTY. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights, and you may have other rights which vary from state to state. If you have any questions concerning this warranty, please write our Customer Relations Center, Honeywell Inc., 1885 Douglas Dr. N., Golden Valley, MN 55422-3992, or call 1-800-468-1502, Monday-Friday, 7:00 a.m. to 5:30 p.m., Central time. In Canada, write Retail Products ON30 Honeywell Limited/Honeywell Limitée, 155 Gordon Baker Road, North York, Ontario M2H 3N7. Home and Building Control Home and Building Control Honeywell Honeywell Limited-Honeywell Limitée 1985 Douglas Drive North 35 Dynamic Drive Golden Valley, MN 55422 Scarborough, Ontario M1V 4Z9 Printed in U.S.A. on recycled 69-1199—2 J.H. Rev. 04-01 paper containing at least 10% www.honeywell.com/yourhome post-consumer paper fibers.

No comments:

Post a Comment

Popular Posts