Honeywell Thermostat SERIES 2000 User Manual - Honeywell Thermostat Manual Download

Latest

Sunday, April 5, 2020

Honeywell Thermostat SERIES 2000 User Manual

Series 2000 Commercial Microelectronic Thermostat Contents Features .................................................................. 3 Programming........................................................... 4 Troubleshooting ...................................................... 18 ¨ U.S. Registered Trademark Copyright © 1996 Honeywell Inc. ¥ All Rights Reserved 1 63-4356—163-4356-1 ENTER UNOCCUPIED SET OCCUPIED PROGRAM MODE TEMPERATURE SET UNOCCUPIED ENTER OCCUPIED SET CURRENT DAY OR SETPOINTS TEMPERATURE PROGRAM MODE PROGRAM DAY SETPOINTS AM Room Mon Occupied System Fan RETURNS TO Heat Auto NORMAL OPERATIONS INCREASE TEMPERATURE Set Program Set Temperature Change OR TIME SETTING Time/Temp Run Occupied Unoccupied Occupied Unoccupied Program Start Time Start Time Day Temp Temp SET OVERRIDE Temporary Set Current Clear Heat/Cool TEMPERATURE Occupied Day/Time Start Time Copy Settings OFFSET AND ACTIVATE TEMPORARY Continuous Unoccupied System Fan DECREASE OVERRIDE TEMPERATURE OR TIME SETTING SELECT SET CURRENT SELECT FAN CHANGE BETWEEN ENTER HOLD MODE SYSTEM DAY AND TIME OPERATION HEATING AND OPERATION COOLING SETPOINTS CLEAR PROGRAM PERIOD COPY ONE PROGRAMMED DAY TO ANOTHER DAY M10256 63-4356—1 2 FEATURES ¥Program up to two Occupied and two Unoccupied time periods for each daily schedule. ¥ Set different schedules for each day of the week. ¥Temporary temperature overrides. ¥Program copy key. 3 63-4356—1 PROGRAMMING The keyboard is located behind the thermostat key provides quick temporary temperature changes cover. Sixteen keys are used to set, review and for increased occupant comfort. The Continuous modify programmed times and temperature settings. Unoccupied key provides energy efficient operation The thermostat display shows day, time, program for extend periods of time. period and temperature. Before starting the program procedure, use the The thermostat can be set for two Occupied and following chart to organize the program schedule. two Unoccupied times for each day of the week (28 independent time settings). Temporary Occupied 63-4356—1 4 Occupied Unoccupied Occupied Unoccupied Day Period 1 Period 1 Period 2 Period 2 Monday Tuesday Wednesday Thursday Friday Saturday Sunday 5 63-4356—1 The program has four temperature settings, Occupied Setting Current Day and Time and Unoccupied heat and cool. The thermostat will ᕡ operate at the Unoccupied temperature setting Press Set Current Day/Time. unless the thermostat is programmed. The following chart shows the default temperature settings. NOTE: On initial power up or after an extended power loss, 1:00 pm flashes Occupied Unoccupied on the LCD until a key is pressed. Setpoint Setpoint Set Day/Time Set Current Set Program Set Temperature Change PM Control Default Desired Default Desired Time/Temp Run Occupied Unoccupied Occupied Unoccupied Day/Time Program Start Time Start Time Day Temp Temp Mon Temporary Set Current Clear Heat/Cool Occupied Day/Time Start Time Copy Settings Continous Heating 70°F 55¡F Unoccupied System Fan (21°C) (13°C) M4951B Cooling 78°F 90¡F (25.5°C) (32°C) 63-4356—1 6 Press Day until the current day is displayed. ᕤ Press Run Program. Run AM NOTE: Sun = Sunday, Mon = Monday, Tue = Room Set Program Set Temperature Change Time/Temp Program Run Occupied Unoccupied Occupied Unoccupied Tuesday, Wed = Wednesday, Thu = Program Start Time Start Time Day Temp Temp Mon Temporary Set Current Clear Heat/Cool Occupied Day/Time Start Time Copy Settings Occupied 1 Continous System Fan Unoccupied System Fan Thursday, Fri = Friday, Sat = Saturday. Heat Auto M4954A Set Day/Time Day Set Program Set Temperature Change PM Time/Temp Run Occupied Unoccupied Occupied Unoccupied Program Start Time Start Time Day Temp Temp Tue Temporary Set Current Clear Heat/Cool Occupied Day/Time Start Time Copy Settings Continous Unoccupied System Fan M4952B Setting Program Times ᕡ Press Occupied Start Time. Press increase ▲ or decrease ▼ key until the NOTE: Anytime a start time is not required, current time is displayed. press the Clear Start Time. NOTE: Tapping the Set Current Day/Time Set Program Start Time will change the time in one hour Occupied AM Set Program Set Temperature Change Time/Temp Run Occupied Unoccupied Occupied Unoccupied Start Time Program Start Time Start Time Day Temp Temp Mon Temporary Set Current Clear Heat/Cool increments. Occupied Day/Time Start Time Copy Settings Occupied 1 Continous Unoccupied System Fan Set Day/Time M4955A Set Program Set Temperature Change Time/Temp PM Run Occupied Unoccupied Occupied Unoccupied Program Start Time Start Time Day Temp Temp Tue Temporary Set Current Clear Heat/Cool Occupied Day/Time Start Time Copy Settings Continous Unoccupied System Fan M4953B 7 63-4356—1 ᕢ Press Day until the desired day is displayed. ᕤ Press Occupied Start Time a second time to set a second Occupied Start Time. Set ProgramStart Time Day AM Set ProgramStart Time Set Program Set Temperature Change Time/Temp Run Occupied Unoccupied Occupied Unoccupied Program Start Time Start Time Day Temp Temp Wed Occupied Temporary Set Current Clear Heat/Cool Occupied Day/Time Start Time Copy Settings Set Program Set Temperature Change Time/Temp Occupied 1 Run Occupied Unoccupied Occupied Unoccupied Program Start Time Start Time Day Temp Temp Continous Start Time Unoccupied System Fan Wed Temporary Set Current Clear Heat/Cool Occupied Day/Time Start Time Copy Settings Occupied 2 Continous Unoccupied System Fan M4956A M4958B ᕣ Press increase ▲ or decrease ▼ key until the ᕥ ▲ ▼ desired start time is displayed. Press increase or decrease key until the desired start time is displayed. NOTE: The program times are in fifteen Set ProgramStart Time minute intervals. (Example: 8:00, Set Program Set Temperature Change Time/Temp PM Run Occupied Unoccupied Occupied Unoccupied Program Start Time Start Time Day Temp Temp Wed Temporary Set Current Clear Heat/Cool 8:15, 8:30). Occupied Day/Time Start Time Copy Settings Occupied 2 Continous Unoccupied System Fan Set ProgramStart Time M4959A AM Set Program Set Temperature Change Time/Temp Run Occupied Unoccupied Occupied Unoccupied Program Start Time Start Time Day Temp Temp Wed Temporary Set Current Clear Heat/Cool Occupied Day/Time Start Time Copy Settings Occupied 1 Continous Unoccupied System Fan ᕦ Press Unoccupied Start Time. M4957A Set Program Start Time Unoccupied Set Program Set Temperature Change Time/Temp PM Run Occupied Unoccupied Occupied Unoccupied Program Start Time Start Time Day Temp Temp Start Time Wed Temporary Set Current Clear Heat/Cool Occupied Day/Time Start Time Copy Settings UnOccupied 1 Continous Unoccupied System Fan M4960A 63-4356—1 8 Press increase ▲ or decrease ▼ key until the ᕩ Press increase ▲ or decrease ▼ key until the desired start time is displayed. desired start time is displayed. Set ProgramStart Time Set ProgramStart Time Set Program Set Temperature Change Set Program Set Temperature Change PM Time/Temp PM Time/Temp Run Occupied Unoccupied Occupied Unoccupied Run Occupied Unoccupied Occupied Unoccupied Program Start Time Start Time Day Temp Temp Program Start Time Start Time Day Temp Temp Wed Wed Temporary Set Current Clear Heat/Cool Temporary Set Current Clear Heat/Cool Occupied Day/Time Start Time Copy Settings UnOccupied 1 Occupied Day/Time Start Time Copy Settings UnOccupied 2 Continous Continous Unoccupied System Fan Unoccupied System Fan M4961A M4963A Press Unoccupied Start Time a second time to set a second Unoccupied Start Time. Copying a Day Set Program Start Time NOTE: The thermostat must be in the program Unoccupied Set Program Set Temperature Change mode to use the copy feature. Go to step 2 Time/Temp Run Occupied Unoccupied Occupied Unoccupied Program Start Time Start Time Day Temp Temp Start Time Wed Temporary Set Current Clear Heat/Cool Occupied Day/Time Start Time Copy Settings UnOccupied 2 if the thermostat is already in the program Continous Unoccupied System Fan mode. M4962B ᕡ Press Occupied Start Time. Set Program Start Time Occupied AM Set Program Set Temperature Change Time/Temp Run Occupied Unoccupied Occupied Unoccupied Start Time Program Start Time Start Time Day Temp Temp Tue Temporary Set Current Clear Heat/Cool Occupied Day/Time Start Time Copy Settings Occupied 1 Continous Unoccupied System Fan M10255 9 63-4356—1 ᕢ Press Day to select the day to be copied if ᕤ Press Day until the day to be copied to is different from the day displayed. displayed. Set Program Start Time Day AM Day Set Program Set Temperature Change Set Program Set Temperature Change Time/Temp Time/Temp Run Occupied Unoccupied Occupied Unoccupied Run Occupied Unoccupied Occupied Unoccupied Program Start Time Start Time Day Temp Temp Wed Program Start Time Start Time Day Temp Temp Wed Thu Temporary Set Current Clear Heat/Cool Temporary Set Current Clear Heat/Cool Occupied Day/Time Start Time Copy Settings Occupied 1 Occupied Day/Time Start Time Copy Settings Continous Continous Unoccupied System Fan Unoccupied System Fan M4966A M4968A ᕣ Press Copy. ᕥ Press Copy. NOTE: donE will be displayed for two Copy Set Program Set Temperature Change Time/Temp Run Occupied Unoccupied Occupied Unoccupied Program Start Time Start Time Day Temp Temp seconds and then the normal Wed Temporary Set Current Clear Heat/Cool Occupied Day/Time Start Time Copy Settings Continous Unoccupied System Fan program display will be shown. M4967A Copy Set Program Set Temperature Change Time/Temp Run Occupied Unoccupied Occupied Unoccupied Program Start Time Start Time Day Temp Temp Temporary Set Current Clear Heat/Cool Occupied Day/Time Start Time Copy Settings Continous Unoccupied System Fan M4969A 63-4356—1 10 ᕦ Repeat steps ᕢ through ᕥ for all the days ᕡ Press Occupied Temp. desired. Set Program Setting Occupied Set Program Set Temperature Change Time/Temp ᕧ Run Occupied Unoccupied Occupied Unoccupied Press Run Program. Temp Program Start Time Start Time Day Temp Temp Heat Temporary Set Current Clear Heat/Cool Occupied Day/Time Start Time Copy Settings Occupied Continous Unoccupied System Fan Run AM Room M4970B Set Program Set Temperature Change Time/Temp Program Run Occupied Unoccupied Occupied Unoccupied Program Start Time Start Time Day Temp Temp Mon Temporary Set Current Clear Heat/Cool Occupied Day/Time Start Time Copy Settings Occupied 1 Continous System Fan Unoccupied System Fan Heat Auto M4954A ᕢ Press increase ▲ or decrease ▼ key until the desired temperature is displayed. Set Program Setting Set Program Set Temperature Change Time/Temp Run Occupied Unoccupied Occupied Unoccupied Program Start Time Start Time Day Temp Temp Heat Temporary Set Current Clear Heat/Cool Setting Program Temperature Occupied Day/Time Start Time Copy Settings Occupied Continous Unoccupied System Fan Setpoints M4971B NOTE: The setpoint temperature range is 40 to 90°F (7 to 31°C) for heating and 45 to 99°F (9 to 37°C) for cooling. 11 63-4356—1 ᕣ Press Heat/Cool Settings to change between ᕥ Press Unoccupied Temp. heat and cool settings. Set Program Setting Set Program Setting Unoccupied Set Program Set Temperature Change Time/Temp Run Occupied Unoccupied Occupied Unoccupied Program Start Time Start Time Day Temp Temp Temp Heat Heat/Cool Temporary Set Current Clear Heat/Cool Occupied Day/Time Start Time Copy Settings Set Program Set Temperature Change UnOccupied Time/Temp Run Occupied Unoccupied Occupied Unoccupied Program Start Time Start Time Day Temp Temp Continous Settings Cool Unoccupied System Fan Temporary Set Current Clear Heat/Cool Occupied Day/Time Start Time Copy Settings Occupied Continous Unoccupied System Fan M4974B M4972A ᕦ Press increase ▲ or decrease ▼ key until the ᕤ Press increase ▲ or decrease ▼ key until the desired temperature is displayed. desired temperature is displayed. Set Program Setting Set Program Setting Set Program Set Temperature Change Time/Temp Run Occupied Unoccupied Occupied Unoccupied Program Start Time Start Time Day Temp Temp Heat Temporary Set Current Clear Heat/Cool Set Program Set Temperature Change Occupied Day/Time Start Time Copy Settings Time/Temp UnOccupied Run Occupied Unoccupied Occupied Unoccupied Program Start Time Start Time Day Temp Temp Continous Cool Unoccupied System Fan Temporary Set Current Clear Heat/Cool Occupied Day/Time Start Time Copy Settings Occupied Continous Unoccupied System Fan M4975B M4973B 63-4356—1 12 Press Heat/Cool Settings to change between Clearing Program Start Times heat and cool settings. ᕡ Press Occupied Start Time or Unoccupied Set Program Setting Start Time until the start time to be cleared is Heat/Cool Set Program Set Temperature Change displayed. Time/Temp Run Occupied Unoccupied Occupied Unoccupied Program Start Time Start Time Day Temp Temp Settings Cool Temporary Set Current Clear Heat/Cool Occupied Day/Time Start Time Copy Settings UnOccupied Continous Unoccupied System Fan Set Program Start Time Occupied AM M4976B Set Program Set Temperature Change Time/Temp Run Occupied Unoccupied Occupied Unoccupied Start Time Program Start Time Start Time Day Temp Temp Mon Temporary Set Current Clear Heat/Cool Occupied Day/Time Start Time Copy Settings Occupied 1 Continous Unoccupied System Fan ▲ ▼ Press increase or decrease key until the M4955A desired temperature is displayed. Set Program Setting ᕢ Press Day until the desired day is displayed. Set Program Set Temperature Change Time/Temp Run Occupied Unoccupied Occupied Unoccupied Program Start Time Start Time Day Temp Temp Cool Temporary Set Current Clear Heat/Cool Occupied Day/Time Start Time Copy Settings UnOccupied Set Program Start Time Continous Unoccupied System Fan Day AM Set Program Set Temperature Change Time/Temp Run Occupied Unoccupied Occupied Unoccupied Program Start Time Start Time Day Temp Temp M4977B Temporary Set Current Clear Heat/Cool Mon Occupied Day/Time Start Time Copy Settings Occupied 1 Continous Unoccupied System Fan Press Run Program. M4978A Run AM Room Set Program Set Temperature Change Time/Temp Program Run Occupied Unoccupied Occupied Unoccupied Program Start Time Start Time Day Temp Temp Mon Temporary Set Current Clear Heat/Cool Occupied Day/Time Start Time Copy Settings Occupied 1 Continous System Fan Unoccupied System Fan Heat Auto M4954A 13 63-4356—1 ᕣ Press Clear Start Time. Temporary Occupied Override Set Program Start Time Clear Setting Temperature Offset Set Program Set Temperature Change Time/Temp Run Occupied Unoccupied Occupied Unoccupied Program Start Time Start Time Day Temp Temp Start Time Mon Temporary Set Current Clear Heat/Cool for Temporary Override Occupied Day/Time Start Time Copy Settings Occupied 1 Continous Unoccupied System Fan ᕡ Press Occupied Temp. M4979B Setting Occupied Set Program Set Temperature Change Time/Temp Run Occupied Unoccupied Occupied Unoccupied ᕤ Repeat steps ᕡ through ᕣ for all the start Temp Program Start Time Start Time Day Temp Temp Wed Heat Temporary Set Current Clear Heat/Cool Occupied Day/Time Start Time Copy Settings Occupied Continous times to be cleared. Unoccupied System Fan M10231 ᕥ Press Run Program. ᕢ Press Temporary Occupied. Run AM Room Set Program Set Temperature Change Time/Temp Program Run Occupied Unoccupied Occupied Unoccupied Program Start Time Start Time Day Temp Temp Mon Temporary Set Current Clear Heat/Cool Occupied Day/Time Start Time Copy Settings Occupied 1 Continous System Fan Unoccupied System Fan Temporary Heat Auto Set Program Set Temperature Change Time/Temp Run Occupied Unoccupied Occupied Unoccupied Occupied Program Start Time Start Time Day Temp Temp Temporary Set Current Clear Heat/Cool M4954A Occupied Day/Time Start Time Copy Settings Continous Unoccupied System Fan M4980A 63-4356—1 14 Press increase ▲ or decrease ▼ key until the Using Temporary Override desired temperature offset is displayed (range ᕡ Press Temporary Occupied. is 0° to 5°F). NOTE: The default temperature setting is the Set Program Set Temperature Change Time/Temp Run Occupied Unoccupied Occupied Unoccupied Program Start Time Start Time Day Temp Temp Occupied setpoint. Temporary Set Current Clear Heat/Cool Occupied Day/Time Start Time Copy Settings Continous Unoccupied System Fan Setting M4981A Set Program Set Temperature Change Temporary Time/Temp Run Occupied Unoccupied Occupied Unoccupied Program Start Time Start Time Day Temp Temp Heat Temporary Set Current Clear Heat/Cool Occupied Occupied Day/Time Start Time Copy Settings Override Continous Press Run Program. Unoccupied System Fan M4982B Run AM Room Set Program Set Temperature Change Time/Temp Program Run Occupied Unoccupied Occupied Unoccupied Program Start Time Start Time Day Temp Temp Mon Temporary Set Current Clear Heat/Cool ᕢ ▲ ▼ Occupied Day/Time Start Time Copy Settings Occupied 1 Press increase or decrease key to Continous System Fan Unoccupied System Fan Heat Auto change the default setting by the offset (range M4954A is 0° to 5°F), if desired. 15 63-4356—1 NOTE: If the offset is zero, the default Using Continuous Unoccupied setting changes in one degree incre- ᕡ ments. If the offset is 1 through 5, the Press Continuous Unoccupied. default setting changes by plus or minus the offset. NOTE: The default temperature setting is the Unoccupied setpoint. The default Temporary appears for five seconds and then the AM Room Set Program Set Temperature Change Time/Temp Run Occupied Unoccupied Occupied Unoccupied Program Start Time Start Time Day Temp Temp display shows the room temperature. Wed Temporary Set Current Clear Heat/Cool Occupied Day/Time Start Time Copy Settings Override Continous Unoccupied System Fan System Fan Auto Auto Setting M4983B Continuous Set Program Set Temperature Change Time/Temp Run Occupied Unoccupied Occupied Unoccupied Program Start Time Start Time Day Temp Temp Unoccupied Heat Temporary Set Current Clear Heat/Cool Occupied Day/Time Start Time Copy Settings Continous Unoccupied System Fan ᕣ Press Run Program to cancel the override. M4984B Run AM Room Set Program Set Temperature Change Time/Temp Program Run Occupied Unoccupied Occupied Unoccupied Program Start Time Start Time Day Temp Temp ᕢ ▲ ▼ Mon Press increase or decrease key to Temporary Set Current Clear Heat/Cool Occupied Day/Time Start Time Copy Settings Occupied 1 Continous System Fan Unoccupied System Fan Heat Auto change the default setting, if desired. M4954A Setting Set Program Set Temperature Change Time/Temp Run Occupied Unoccupied Occupied Unoccupied Program Start Time Start Time Day Temp Temp Heat Temporary Set Current Clear Heat/Cool Occupied Day/Time Start Time Copy Settings Continous Unoccupied System Fan M10232A 63-4356—1 16 ᕣ Press Heat/Cool Setpoint to change between NOTE: If ▼ or ▲ appear under the tempera- heat and cool settings. Use increase ▲ or ture display, it means that both the decrease ▼ key to adjust temperature settings. heating and cooling setpoints are being adjusted. Tapping the key will change ᕤ Press Run Program again to cancel the Hold both the heat and cool setpoints by and to return to the program. one degree. Press Heat/Cool Settings after the desired setpoint is reached to Run AM Room review the settings. Set Program Set Temperature Change Time/Temp Program Run Occupied Unoccupied Occupied Unoccupied Program Start Time Start Time Day Temp Temp Mon Temporary Set Current Clear Heat/Cool Occupied Day/Time Start Time Copy Settings Occupied 1 Temporary Setting Continous System Fan Unoccupied System Fan Heat Auto Set Program Set Temperature Change Time/Temp Run Occupied Unoccupied Occupied Unoccupied M4954A Program Start Time Start Time Day Temp Temp Heat Temporary Set Current Clear Heat/Cool Occupied Day/Time Start Time Copy Settings Occupied Continous Unoccupied System Fan M4987B Changing Temperature Setpoint Until ᕢ Press Run Program to cancel the temporary Next Program Period setpoint and to return to the program. ᕡ Press increase ▲ or decrease ▼ key until the Run AM desired temperature is displayed. Room Set Program Set Temperature Change Time/Temp Program Run Occupied Unoccupied Occupied Unoccupied Program Start Time Start Time Day Temp Temp Mon Temporary Set Current Clear Heat/Cool Occupied Day/Time Start Time Copy Settings Occupied 1 Continous System Fan Unoccupied System Fan Heat Auto M4954A 17 63-4356—1 TROUBLESHOOTING GUIDE Symptom Action Display will not come on. ¥ Check if the circuit breaker is tripped—reset the circuit breaker. ¥ Check if the fuse is blown—replace the fuse. ¥ Check if the system switch at the equipment is in the Off position— set to the On position. ¥ Check wiring between thermostat and HVAC equipment—replace any broken wires. ¥ If 24 Vac is present, proceed with troubleshooting. Temperature settings will not ¥ Check that the temperature setpoints are: change (Example: cannot set - heating: 40 to 90¡F (7 to 31¡C) the heating higher or the - cooling: 45 to 99¡F (9 to 37¡C). cooling lower). ¥ Keyboard is locked. Contact the installer. Heating will not come on. ¥ Check if the circuit breaker is tripped—reset the circuit breaker. ¥ Check if the fuse is blown—replace the fuse. ¥ Check if the system switch at the equipment is in the Off position— set to On position. ¥ If 24 Vac is present, proceed with troubleshooting. ¥ Wait five minutes for the system to respond. ¥ Set system selection to Heat. (Continued) 63-4356—1 18 TROUBLESHOOTING GUIDE (Continued) Symptom Action Cooling will not come on. ¥ Check if the circuit breaker is tripped—reset the circuit breaker. ¥ Check if the fuse is blown—replace the fuse. ¥ Check if the system switch at the equipment is in the Off position— set to On position. ¥ If 24 Vac is present, proceed with troubleshooting. ¥ Wait five minutes for the system to respond. ¥ Set system selection to Cool. System on indicator Wait a minute after seeing the flame or snowflake and then check the (flame=heat, snowflake=cool) registers. is displayed, but no warm or cool air is coming from the registers. 19 63-4356—1 Automation and Control Solutions Honeywell International Inc. Honeywell Limited-Honeywell Limitée 1985 Douglas Drive North 35 Dynamic Drive Golden Valley, MN 55422-4386 Scarborough, Ontario M1V 4Z9 63-4356—163-4356—1 J.H. Rev. 12-96 20 20 www.honeywell.com/buliding/components

No comments:

Post a Comment

Popular Posts