Honeywell Thermostat TL7135A User Manual - Honeywell Thermostat Manual Download


Sunday, April 5, 2020

Honeywell Thermostat TL7135A User Manual

TL7135A User Guide Non-programmable Thermostat 1. 6. n Description s Backlight Honeywell’s TL7135A thermostat can be connected to an electric heater to The display illuminates for 5 seconds when the backlight button is pressed. control the room temperature. When either of the buttons is pressed, the display illuminates for 10 sec- onds. 7. t Temperature Setting Appears when Temperature The thermostat normally displays the actual temperature. To view the set- the setpoint is display point, press one of the buttons once. The setpoint will appear for 5 sec- displayed onds. To change the setpoint, press one of the buttons until the desired temperature is displayed. To scroll the setpoint faster, do not release the but- Temperature ton. Heating power * adjustment buttons 8. Backlight button u Technical Specifications Power supply: refer to the power base installation instructions Set the switch to Setpoint range: 5°C to 30°C (40°F - 86°F) Standby to cut power Display resolution: 0.5°C (1°F) to the heater Storage: -20°C to 50°C (-4°F to 120°F) Heating cycle length: 15 minutes * The thermostat displays the heater duty cycle required to maintain the desired temperature. For example, if the heater is activated 40 percent of the 9. time, is displayed. ; Warranty Display Honeywell warrants this product, excluding battery, to be free from defects in the work- manship or materials, under normal use and service, for a period of five (5) years from % of duty cycle 1 to 24% 25 to 49% 50 to 74% 75 to 99% 100% the date of purchase by the consumer. If at any time during the warranty period the prod- uct is determined to be defective or malfunctions, Honeywell shall repair or replace it (at 2. Honeywell's option). Assembly/Disassembly If the product is defective, o (i) return it, with a bill of sale or other dated proof of purchase, to the place from which • To remove the control module from the power you purchased it, or base, loosen the captive screw underneath the (ii) call Honeywell Customer Care at 1-800-468-1502. Customer Care will make the determination whether the product should be returned to the following address: thermostat and pull the two components apart as Honeywell Return Goods, Dock 4 MN10-3860, 1885 Douglas Dr N, Golden Valley, shown. MN 55422, or whether a replacement product can be sent to you. • To install the control module onto the power This warranty does not cover removal or reinstallation costs. This warranty shall not apply if it is shown by Honeywell that the defect or malfunction was caused by damage base, reverse the above procedure. which occurred while the product was in the possession of a consumer. NOTE: Always keep the thermostat's vents clean and Honeywell's sole responsibility shall be to repair or replace the product within the terms unobstructed. stated above. HONEYWELL SHALL NOT BE LIABLE FOR ANY LOSS OR DAMAGE OF ANY KIND, INCLUDING ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING, DIRECTLY OR INDIRECTLY, FROM ANY BREACH OF ANY WARRANTY, 3. EXPRESS OR IMPLIED, OR ANY OTHER FAILURE OF THIS PRODUCT. Some states Configuration do not allow the exclusion or limitation of incidental or consequential damages, so this p limitation may not apply to you. You can select the temperature display (°C or °F) using a THIS WARRANTY IS THE ONLY EXPRESS WARRANTY HONEYWELL MAKES ON DIP switch (S1) on the back of the control module. THIS PRODUCT. THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PUR- POSE, IS HEREBY LIMITED TO THE FIVE-YEAR DURATION OF THIS WARRANTY. Some provinces do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. 4. This warranty gives you specific legal rights, and you may have other rights which vary Power-up from province to province. q If you have any questions concerning this warranty, please write Honeywell Customer As soon as the thermostat is powered, it undergoes a series of Relations, 1985 Douglas Dr, Golden Valley, MN 55422 or call 1-800-468-1502. In Can- tests before displaying the actual temperature. ada, write Retail Products ON15-02H, Honeywell Limited/Honeywell Limitée, 35 Dynamic Drive, Scarborough, Ontario M1V4Z9. 10. 5. Customer Assistance Error Messages r If you have any questions about the operation of your thermostat, please go to LO: The measured temperature is below 0°C (32°F). Heating is, or call Honeywell Customer Care toll-free activated. at 1-800-468-1502. HI: The measured temperature is above 50°C (122°F). TL7135A Printed in China 69-1806 3/5/05 1/1

No comments:

Post a Comment

Popular Posts