Furuno - FA-30

Below are all the different types of Furuno. Select the device of your choice, to download the manual

Contents

FA 30 VHF SPLITTER MOUNTING PROCEDURE The VHF splitter enables the AIS receiver and VHF transceiver to share a single VHF antenna Note The FA 30 can not receive AIS signal when the VHF transceiver is transmitting Equipment Lists VHF Splitter Type OP05 106 Code No 000 011 704 No Name Type Code No Qty Remarks 1 VHF Splitter Assembly OP05 106 1 001 024 100 1 Rear panel pcb 05P0817 2 Installation Materials CP05 11301 001 024 110 1 Cable tie CV 70N 1 pc Mounting procedure 1 Open the detachable cover View Side View Put fingers on both sides and pull outwards and lift up to take off 2 Unfasten four screws to separate the chassis from the mounting plate 3 Disconnect plugs on J7 J12 and the ground wir ...
Click