Winegard - RA-7296

Below are all the different types of Winegard. Select the device of your choice, to download the manual

Contents

STEP 5 Install connectors on downlead and set 2 cable as shown in Figure 5 Attach downlead cable to jack on wallplate amplifier marked antenna as shown in Figure 4 Attach cable going to set 2 outlet to jack on power supply marked SET 2 Attach cable coming from cable inputtojackon powersupply marked CABLE NOTE Make sure the antenna is in the operating position up and pointed at the station desired INSTALLING FC 5910 CONNECTORS ON COAX CABLE _1 2 lt 1 lt Inner Insulation Outer Cover _ gt lt 14 2 T3 Center Conductor FIGURE 5 Step 1 Strip outer cover back 1 2 from end of cable Fray braid back as far as outer cover will allow Step 2 Trim braid close to outer cover and remove 1 4 of inner insulation bei ...